3 Signs You Need Home Rewiring in Medford, NJ

Your home’s wiring is like circulatory system of your body. While veins bring blood throughout your limbs, you home’s wiring brings electricity into every room, allowing you the ability to power devices throughout your house. Like how you should take care of your body, proper maintenance of your homes wiring is vital in keeping things working smoothly and lasting as long as possible.Eventually however, you will run into issue with your home’s wiring, because nothing lasts forever. Below we have listed 3 signs that you need home rewiring in Medford, NJ, and that it may be time to call in a professional for a wiring diagnosis.

  1. An Electric Buzz: If you hear a constant electric buzz or humming in your home, especially near outlets and switches, it’s time for home rewiring. As the wiring in outlets age, wires can become frayed and less efficient, resulting in a higher chance of fire in your home. Additionally, if outlets feel warm to the touch or show any signs of smoke or fire, call an electrical professional immediately for repair.
  1. Not-So-Bright-Lights: Dimmed lights can be a great home feature for ambiance or energy savings, but that should be your call, not the wiring’s. If the lights in your house frequently dim, flicker or go out, it’s a sign you need to consider home rewiring in Medford, NJ. Unreliable lights could be a sign of aging or frayed wires, and with the help of a professional electrician, can be back up to full brightness in no time.
  1. Three Prongs Are Better Than Two: Do the outlets in your home still have only two prongs for electric input? If so, it’s time for updated home rewiring. The older, two prong outlet style is extinct in current electrical remodeling, and all homes should have the newer three prong outlet variety installed. These newer outlets help protect you from electrocution by adding in a third “ground” prong, and are a staple of modern home safety.

If you live in an older home that hasn’t seen a visit from an electrician in ages, chances are, it’s time for some electrical home rewiring. For all your home rewiring needs in Medford, NJ, Raynor Electric can keep the power running smoothly with our professionalism and expertise.


 

 

 

 

How Can Home Rewiring in Medford Benefit You?

When it comes to maintaining or enhancing the value of your property, as well as increasing your enjoyment of your home, home rewiring in Medford can be a worthwhile investment.

Home Rewiring in Medford Offers Distinct Benefits

When you purchase a home, you might envision doing some redecorating, or even building an extension onto one of the rooms. However, unless you’ve gone the route of buying a fixer-upper, it’s unlikely that you’ll give much thought to rewiring. However, especially if your home is more than 10 years old, upgrading the electrical system might be the smartest investment you can make. Here’s why:

  • It’s safer. An old electrical system with worn or damaged wires is a fire hazard. At the same time, even a relatively new one can cause electrical fires if it’s not up to code, or if it’s consistently overloaded. Upgrading the wiring according to all of the latest codes and using the most cutting edge techniques and material will provide you with a much safer electrical system.
  • It provides you with more power. In the past decade, the number of power-using devices an average household uses has increased exponentially. We don’t just use household appliances and a couple of TVs and stereos. We have multiple computers, phones, tablets and laptops—and they all need power. However, if you don’t have enough power outlets and you find yourself using extension cords to meet your power needs, you’re placing too much demand on your electrical system. An upgrade will take your current power needs into demand and ensure adequate power.
  • It adds value to your property. Most homebuyers aren’t shopping for a property that will require extensive work. Considering our busy lifestyles, most people are looking for a turnkey solution—and they’re willing to pay for it. Making sure that you have a powerful, top-quality electrical system will therefore add value to your home.

Raynor Electric Provides Top-Notch Home Rewiring in Medford

You’re best advised to work with a contractor with a proven track record in home rewiring. That’s where the team at Raynor Electric comes in. Call us to find out more about our top-rated home rewiring services.

Re-Wiring Service- New Jersey

Signs You Need to Have Re-Wiring Done in Your Home

Having your home re-wired can seem like a daunting process.  It is, however, absolutely imperative for having a safe, modern home that you don’t operate with damaged wiring: a 2008 study by the U.S. Fire Administration showed that worn/failing insulation around electrical wires are the leading cause of electrical fires in the U.S., with 30% of these incidents being traced back to inadequately protected cords. With many of our competitors in the New Jersey area, re-wiring can be expensive, inconvenient, and an all-around unpleasant process for homeowners.

But residential re-wiring doesn’t need to be painful!  At Raynor’s Electric, we provide all forms of re-wiring service from GFCI (Ground Fault Interrupt Circuit) installation to switch replacement and so much more for a reasonable price.  For under $100, our expert technicians will do a complete safety inspection on your entire home so your family can feel safe 100% of the time.

We’re the electric experts, and we know everything there is to know about re-wiring and electrical system safety. To make sure your home is safe, we want you to be informed as well!  Here are some signs that your home may require our excellent re-wiring services right away:

The Problem With Old Homes

Here on the East Coast, a lot of homeowners are living in old houses, many of them 50+ years-old.  Unfortunately for the tri-state area, a house’s age is the first sign that it may need rewiring.  Why?  Older wires cannot handle the electrical load of a modern home.  With all of the new appliances the average American is running, charging, or otherwise taking up an outlet for, chances are that you’re putting a major strain on those deteriorating lines.  Older lines aren’t properly insulated, and they need to be replaced.  Don’t risk your family’s safety: call Raynor Electric today for a full-house inspection and get started being safer right away.

4 Symptoms of a House in Need of Re-Wiring

Other than having an old home, these are some signs you need a check-up sooner rather than later:

  1. Circuit Breaker Trips Frequently

The job of your circuit breaker is to stop hazardous electrical leaks by shutting off the power as soon as electricity exceeds the number of amps it is supposed to handle.  If your appliances are constantly overheating, it could be a sign of system damage.

  1. Aluminum Wiring

The Consumer Product Safety Commission has warned that failing alumninum connections frequently overheat.  You can tell if your wiring is aluminum by looking at the wiring jacket for the “AL.”

  1. Discolored or Charred Oulets/Switches

If electricity is being released into the plastic of your outlets and switches, you’ll start to see burn marks.

  1. Burning Smell

If there seems to be a perpetual smell of something burning in any area of your home, it could be the fault of broken insulation on your wiring.   These issues are not to be taken lightly, as electrical fires can be extremely destructive as well as difficult to put out.

Don’t risk a devastating electrical fire for even one more day.  Call today for an inspection, and leave your rewiring to the best experts around.

Aluminum Wiring Replacement in Cherry Hill

Copper Wiring a Safer Alternative to Aluminum Wiring

When it comes to keeping your Cherry Hill home safe from fires and other electrical hazards, you may want to look twice at the age your home was built. Wondering what this has to do with fire and electric safety? Simple: a national survey conducted by the Franklin Research Institute for CPSC showed that homes built before 1972, and wired with aluminum, are 55 times more likely to suffer from fire hazard conditions than homes wired with copper.

Thanks to a copper shortage in the 1960s, many homes built before the early 70s had to be wired with aluminum; however, multiple fire hazard investigations conducted by the CPSC showed that aluminum wiring heats up much more easily than copper wiring. Add to this the amount of electricity required by major appliances (including dishwashers, furnaces, etc.), and it’s no wonder that the CPSC is recommending that these homes switch from aluminum wiring to copper wiring ASAP.

If your home was built in the prime aluminum wiring phase of the 1960s, it’s important to keep your eye out for the following trouble signs.

 When to Replace Aluminum Wiring

  • Look at the printed or embossed wiring on the outer jacket of the electric cables. You’ll find visible cables in your basement, the garage, or in your utility closet. Take a close look at the exposed cables to see if you can find the words “Al” or “Aluminum” printed on any of the cables. If you can’t see this marking despite having a home built during the prime of aluminum wiring, contact Raynor Services for a home inspection. Our qualified electricians can help you determine if you have aluminum wiring.
  • More obvious signs of aluminum wiring in your home is if your electrical wiring “overheats” often.  If you suddenly lose power without warning or sometimes detect a burning smell, it’s important to call on a qualified electrician – like Raynor Electric! – right away.

Raynor Services is located in Southern New Jersey. Our professionals pride themselves on making the switch from aluminum wiring to copper wiring.  For more information on transitioning from aluminum to copper wiring, contact Raynor Services today!

FAQ: Knob and Tube Replacement in Pennsaucken

Do You Have Knob and Tube Wiring? Replace it Today!

Once upon a time, knob and tube wiring was a popular choice in homes in Pennsaucken and beyond. From about the 1880s until well past the 1930s, many southern New Jersey homes were built using this wiring method. While this method is no longer used today – it’s not only antiquated, but it’s downright dangerous – there are still homes that use knob and tube wiring.

Are you one of those homes? Learn more about it from the experts at Raynor Services!

Q: Why is knob and tube wiring dangerous?

A: Because knob and tube wiring wasn’t meant to feed an entire household of electronics with electricity; after all, in the early 20th century, there weren’t many electrical appliances to begin with at all. Now that we have dishwashers, washers/dryers, computers, and television screens all competing for electricity, knob and tube wiring can become dangerously overloaded.

Q: What can happen?

A: When knob and tube wiring conducts too much electricity, the conductors become dry and sometimes even bare after repetitive use. The overflow of excessive electrical currents causes the installation to crumble away, which leaves the conductors exposed and vulnerable. At this stage, you’re not only at risk for short-circuiting; the odds of you encountering an electrical fire have significantly skyrocketed.

That’s why it’s important to call on a professional electrician to replace your knob and tube wiring in Pennsaucken. That’s why you should call on Raynor Electric Services.

Q: What will Raynor Services do for me if I have knob & tube wiring?

A: When we replace your knob and tube wiring in your home, our professional and certified electrician will cut a hole in your ceiling to remove the old wires.  This allows your electrician to quickly replace your outdated rewiring with new and safer wiring.  Not to worry: our electricians will quickly replace any work done on your ceiling with a brand-new patch that seamlessly blends in with your home.

Our professionals pride themselves on providing superior replacement of knob and tube wiring in the Pennsaucken areas and beyond.  For more information on our electric services in the greater southern New Jersey area, contact Raynor Services today!

Home Re-Wiring in Trenton

Make Your Home Safer With Updated Wiring

Have you recently thought about remodeling your home and wondered what you were going to do with the electrical wiring you currently have in place?

Remodeling can be fun, but when doing so there is always the risk of running into electrical problems. If you live in an older home, you may have knob and tube wiring that needs replacing. Or, you could discover a live wire that a do-it-yourselfer or careless electrician hid behind a wall.

Anytime you come across these issues, remodel or not, it’s important that you have a trained, licensed electrician come out to re-wire your home.

Raynor Electric’s Home Re-Wiring Services

Here at Raynor, we want your home to run as efficiently as possible. That’s why we think electrical upgrades and re-wiring is sometimes necessary.

We can perform an array of re-wiring services, including:

  1. Knob and tube replacement: Knob and tube is an antiquated form of wiring that was popular up until the 1930s. Even if your home was built prior to that point, your appliances and electronic devices were not. They require much more power than knob and tube can provide, so it’s important that you have them replaced with safer wiring that’s up to code.
  2. Service entrance cable and meter socket installation: While it is the utility company’s job to meter the electricity that enters your home, it’s your responsibility to install and maintain the service entrance cable and meter socket. This is not something you should attempt to do yourself.
  3. Switch and outlet replacement: Whether you just want a new look and feel to the switches in your home, or the ones you currently have burnt out, Raynor can install brand new ones for you hassle-free. Switches and sockets that are burnt out can be a hazard, so it’s best to get them fixed as soon as you can!
  4. Ground fault circuit interrupters: Having GFCIs in your home is extremely important as they protect you and your family from burns or electrical shocks. They detect ground faults and stop a current if there is any dangerous change. These are especially necessary in kitchens and bathroom

These are just some of the many re-wiring services we offer here at Raynor Electric. Don’t attempt to try these projects yourself. To get one of our trained team members on the job, give us a call today!

Ask a Trenton Electrician: What is Knob and Tube Wiring?

What is knob-and-tube wiring exactly? It’s an outdated method of electrical wiring found in homes built before the year 1950.  The name comes from the ceramic knobs that support the rig and the ceramic tubes that protects the wiring. The primary difference between today’s wiring and knob-and-tube style is that the black and white wires are separated and spaced a few inches apart in knob-and-tube. In modern wiring, the black wire, white wire and ground wire are all packaged in a single cable. The way the wires are insulated is different too: modern wiring is insulated with plastic; knob-and-tube with rubber. The problem is that the rubber insulation is wears away over time. This is often the reason that knob-and-tube wiring finally needs to be replaced.

Another reason that replacing knob and tube wiring often needs to be replaced is that the wire is older and has been in service for many years. This can make for the inefficient and unreliable conduction of electricity. Another reason is the lack of a ground wire, which creates an emergency path for stray electricity that can prevent electrocution. Modern wiring has a ground wire whereas knob-and-tube wiring does not.

Some of the other common problems you may come across with knob-and-tube include:

  • Poor Connections: The majority of problems with knob-and-tube wiring almost always result from faulty connections made during the original installation.
  • Damage: By definition, knob-and-tube wiring is old. That means it has probably been subjected to the clumsiness of multiple amateur handymen on top of decades of wear and tear.
  • Brittleness: The rubber insulation on knob-and-tube becomes brittle over time. The wiring can often become brittle in high heat areas, including connections above ceiling light fixtures.

If your home is still powered by knob and tube wiring, you are just asking for trouble. Call Raynor Services and learn how we can help you rewire your home!

Home Remodel Wiring in Cherry Hill, NJ

home-rewiring

Room Can’t Look Good Without Proper Wiring

If you are planning a renovation in your kitchen or bathroom, or you’re planning a room addition, it is critically important that you consider the “inside parts” of the job as much as what your finished project will look like. No matter how great something looks, it won’t matter if the wiring doesn’t work correctly.

This type of job should only be performed by a qualified technician, whether you need complete re-wiring or you just need some safety features added.

For example, if you’re re-doing your kitchen and you need wiring for new appliances such as a dishwasher, refrigerator, or a garbage disposal, leave it to a pro. If you are not extremely experienced in working with electricity or you don’t have the right tools or equipment, you could easily make a mistake that could lead to an injury or substantial damage.

Make the safe choice and call Raynor Services today if you are planning any sort of home renovation or remodeling project!